Installation Start:
Please start the installation only by running the setup.exe file.
The file SLSS_J2534_PassThru_Installer.msi only contains the installation content and must not be used directly to start the installation process.

Configuration Setup:
After installation is complete, launch the installed configuration program.
Save your desired settings to register the SeRoSys-CAN hardware with the PassThru API.
The configuration program also allows you to test if the connection to the dongle has been successfully established.

Using the Diagnostic Tool:
Once configuration is complete, you can launch your diagnostic tool and select the SLSS J2534 PassThru API as the communication interface.

License Requirement:
Please note that a valid license is required to use the PassThru API.
Licenses can be purchased from SeRoSys Technology LLC.

Support:
If you experience any problems or malfunctions while using the API,
please contact technical support via the following link:
👉 https://serosys-tech.com/tech-support/

Ownership Information:
The SLSS J2534 PassThru API is developed and owned by
Sebastian Langer Software Solutions UG (haftungsbeschränkt),
in cooperation with SeRoSys Technology LLC.
All rights reserved.


Changelog:

V1.0.3:		First release version
V1.0.4: 	Add timing compatibility mode for older systems